Handmade "Hold on Tight" Pedal

Produktnummer: HP-HT
Handmade Bass Overdrive Pedal



HOLD ON TIGHT – Bass Overdrive pedal:

This is a classic, tube like sounding bass overdrive pedal.

There are 2 circuits inside, one of which holds the original sound of your bass guitar. With the Drive pot you can add the distorted sound to the clean signal with the help of the parallel electronic circuit.  This means, by adjusting the Drive pot you can use the "Hold On Tight" pedal like a bass overdrive or a clean booster or a simple bass preamp with 2 channel equalisation.

With this pedal you can really begin to explore and engage a greater variety of sounds. It gives you the opportunity to change your Höfner 500/1 bass sound to reflect other styles, letting you push your bass even further. With the 2 special diodes that this pedal uses, you can mix the bass sound, for example, to emulate what McCartney used on the Sgt. Peppers and Magical Mystery Tour Beatles albums.

With any bass you can mix a modern, dirty, crunchy, punchy bass sound with great headroom.

The Volume pot changes the output signal, the 2 channel equalisation (Bass & Treble) change the mixed signal low and high frequencies. The Drive pot allows you to blend the original and the overdriven circuits.

True bypass.

This pedal gives you the most authentic tones and each pedal is finished with a genuine 1960s raised Höfner logo.



Case: Metal
Controls: Volume, Bass, Treble, Drive
Input: 1/4 jack
Output: 1/4 jack
Power: 9V adaptor (not supplied) or 9V battery
True bypass: Yes
  Specifications subject to change